Turnouts

I have finally finished the three F20 turnouts that I need for my layout. The single right hand turnout is around 500 mm long and the right hand crossover is around 750 mm.

The turnouts are constructed from flat bottom rail soldered to my own custom etched chairplates on PCB sleepers. It took around 6 months to draw and etch my own chairplates and then a further 6 months to construct the turnouts. I have calculated that I have soldered over 900 chairplates in total; I am glad I didn't calculate this before I began soldering!

Baseboard edging

I have taken some photos of the baseboard edging and baseboard ends. These are laser cut from a mixture of 4 mm mdf and 4 mm ply. The drawings were prepared in CorelDraw.

Baseboard edging templates

Brass pattern makers dowels for alignment , holes for these also laser cut

Bridge and baseboard edging viewed from South

Bridge and baseboard edging viewed from North

View of layout from above showing progress to date

View of layout from side showing progress to date

Weathering

I have had a couple of my models weathered and detailed by Mercig Studios. I have taken a couple of photos of them passing through Swinton.

58003

47539

Bridge

Have now completed my laser cut bridge except for painting and etch fencing for the bridge sides.

Mk3

Finally have some mk3 coaches including buffet for my two swallow livery HST 125.

Station platforms

Completed assembly of station platforms.

I have taken photos of the model to match photos of the prototype.

Laser cutting station

I have drawn my station platforms using Corel Draw in order to get the parts laser cut. Black lines are cut lines and red and green lines are etch lines.

 

The parts were laser cut for me by York Modelmaking and I received these today.